Sanitaryware Installation

Sanitary Ware Installation Guide

1. General Installation Preparation

Check all items for cracks, glaze defects, or missing accessories before installation.
Keep installation manuals or templates ready.
Use only recommended grade sanitary silicone, anchor bolts, and thread sealants.
Ensure plumbing lines are flushed before connecting sanitaryware.

2. Wash Basin Installation

Type	Key Steps
Wall-Hung Basin	Use wall template to mark bolt holes Drill & fix anchor bolts securely Seal back with silicone, connect waste & tap
Countertop Basin	Cut counter as per basin shape Apply silicone below basin rim Connect waste & tap above counter
Pedestal Basin	Fix basin to wall and rest on pedestal Hide pipework inside pedestal Seal contact points with silicone

Always ensure height from finished floor = 800–850 mm for user comfort.

3. Water Closet (WC) Installation

Type	Key Steps
Floor-Mounted (S-trap / P-trap)	Place on setout point using manufacturer's template Fix using anchor bolts or cement-based adhesive Connect to waste pipe with sealing ring Apply silicone around base
Wall-Hung WC	Ensure concealed tank is installed & tested before fixing WC Mark bolt points, fix WC on wall carrier frame Tighten bolts, connect flush pipe & waste outlet Test flush before sealing with silicone

Standard height from floor to top rim (WC): 400–430 mm
For western toilets, test both flush performance and water seal depth.

4. Urinal Installation

Install urinal brackets or frame at recommended height
Connect flush inlet and drain outlet.
Apply silicone around edges
Optional: install urinal partition walls for public use

Ideal height from floor to urinal lip:

Men : 610–650 mm
Boys: 350–450 mm

5. Silicone Sealing & Final Finishing

Use non-staining, waterproof sanitary silicone
Seal contact points between sanitaryware and walls/floor
Wipe excess before it cures
Leave silicone to cure 24 hours before using fixtures

6. Post-Installation Checks

Checklist Item	What to Check
Flush Operation	Strong flow, no leakage from joints
Water Seal Depth (WC)	50–75 mm visible water in bowl trap
Fixing Stability	No rocking or movement in installed fixtures
Glaze Cleaning	Remove adhesive or tape marks gently
Trap Odor Check	Ensure proper U-bend seal and air trap